Finishing Charging; Interrupting Charging; Buffering - Fronius Acctiva Seller Manual De Instrucciones

Finishing char-
ging
Risk of ignition of oxyhydrogen caused by sparks resulting from the charging
leads being disconnected too soon.
This can result in severe personal injury and damage to property.
▶
1
2
3
Interrupting
NOTE!
charging
Danger due to disconnecting or unplugging the connection sockets and connec-
ting plugs during the charging process.
This can result in damage to connection sockets and connecting plugs.
▶
1
2

Buffering

With buffering, vehicle functions (e.g. car radio, sliding roof, etc.) may be de-
monstrated during the charging process. Please note the following:
-
-
-
56
WARNING!
Before disconnecting the charging leads, press the Stop/Start button to end
buffering mode.
Press the Stop/Start button to complete charging
Disconnect the black charging lead from the negative pole (-) on the battery
Disconnect the charging lead (red) from the positive pole (+) on battery
Do not disconnect or unplug charging leads while charging.
Press the Stop/Start button while charging
- The charging process is interrupted
Ready indicator flashes
-
Press the Stop/Start button again to continue charging
The current used over a long period must be less than the charging current.
If the charging current is less than the current used over a long period, the
battery will become discharged.
The charging period is longer in buffering mode and may therefore trigger a
safety cut-out.