Mainstays MS95-010-103-02 Instrucciones De Montaje página 7

M6 x 50 mm
(2 used in this step)
NOTE: Please do not fully tighten all bolts until you finish assembling the frame. Once assembled,
go back and fully tighten all bolts. This will make it easier during assembly of unit.
6. Insert one Barrel Nut (8) into the bottom side hole of one Chair Backrest (E). Be sure that the cross slot
on the Barrel Nut faces out and that the threaded hole points towards the entry of the bolt along the
bottom rail.
7. Align and attach the Chair Backrest (E) to the Chair Right Back Leg (D) with three Wood Dowels (10)
and two 50 mm Bolts (4). As shown.
Assembly Instructions for Chair
E
D
10
8
Bolt
④
4
Barrel Nut
(1 used in this step)
⑧
7
10
4
Wood Dowel
(3 used in this step)
⑩