Listening To The Satellite Radio - JVC KD-ADV5380 Manual De Instrucciones

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.
• XMDirect™ Universal Tuner Box—Using a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening
to the XM Satellite radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically.
"UPDATING" flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
Activate your SIRIUS subscription after
connection
1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
3
Check your SIRIUS ID, see page 28.
4
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
22
Activate your XM subscription after connection
• Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect™ Universal Tuner Box starts updating
all the XM channels. "Channel 1" is tuned in
automatically.
3
Check your XM Satellite radio ID labelled on
the casing of the XMDirect™ Universal Tuner
Box, or tune in to "Channel 0" (see page 23).
4
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).