PLAYKIN BENTLEY Manual Del Usuario página 61

FASTEN THE FRONT WHEELS
Normal Wheel
6 5
×
Remove all parts from the front axle.
1. Slide a Ø10 washer onto the front axle.
2. Slide a bushing into the hole in the center of the normal wheel.
3. Slide the normal wheel over the rear axle. And keep the normal wheel with the bush.
4. Slide a Ø10 washer onto the front axle.
5. Tighten a locknut on the end of the front axle with a wrench.
6. Fit the hubcap to the wheel.
×
Repeat the above procedure to mount the other front wheel.
2
4
61
Front axle
1
3
Lower front view
EN