De-Rigging - NEILPRYDE RS6 Manual De Instrucciones

d. In order to get the bottom cam
onto the mast you will need to apply
the boom first. Set the boom to the
recommended setting printed on
the bottom of the sail. Next, clamp
the boom on the mast and apply
a little bit of out-haul tension.
Note: If you have problems applying the
cams to the mast, first apply the boom
and put some out-haul tension on the sail.
Follow the same procedure outlined above.
With slightly positive outhaul it will be even
more straightforward to apply the cams.

DE-RIGGING

08
e. Before applying the last cam make
sure the zipper (at the bottom cam)
is open.