Height Adjustment; Resetting - Pressalit MCT 2 Instrucciones De Uso Y Mantenimiento

Height adjustment

The height adjustment is controlled by the wired remote control unit.
en

Resetting

If the lifting function does not work properly or if the two lifting columns are
out of sync, try resetting the lifting system. Press and hold the up button and
the down button simultaneously. The columns will move down after a few
seconds while a beep tone is heard. Keep holding both buttons until the beep
tone disappears. The lifting columns are now reset.
20
Press and hold the Up button to raise the unit .
When the button is released, the motion stops.
Press and hold the Down button to lower the unit .
When the button is released, the motion stops.
To avoid the risk of strangulation, make
sure that the wired remote control is
placed in its holder when not in use.
Take care to avoid injury to hands,
feet and head when in the vicinity of
moving mechanical parts.
The change trolley can be
adjusted 400 mm / 153/4" up
and down .
Max user weight:
200 kg / 440 lbs
Max load:
250 kg / 550 lbs