BABYZEN YOYO connect Guia Del Usuario página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en
Unfolding YOYO connect
1. Ensure your child is kept away before
unfolding.
2. Carry YOYO connect as depicted,
with your thumb supporting the shiny
carrying handlebar, and other fingers
holding YOYO connect handlebar.
3. With your other hand, unlock the fold
latch.
4. While keeping YOYO connect
handlebar in your grip, release your
thumb, and lift swiftly.
5. YOYO connect automatically locks
in open position with an audible
"click".
Connecting with YOYO² stroller
(model: US10111)
1. Engage the parking brake of stroller.
2. Engage the parking brake of YOYO
connect.
3. Grab the white rings of YOYO
connect toward together until the
red triangles are fully shown.
4. Target the connection pins to the
holes of the stroller rear legs, which
are near the basket velcro.
5. Release the white rings until the red
triangles are fully covered.
14
Adjusting backrest angle
To recline backrest, adjust backrest
straps length by lifting the plastic
buckle.
To raise backrest, adjust backrest
straps length by pulling on the "O"
ring.
Always ensure both sides are
balanced.
Parking brake
To engage parking brake of
both stroller and YOYO connect
simultaneously, step on rear section
of the red pedal on YOYO connect.
Ensure the brakes are properly
engaged.
To disengage parking brake of
both stroller and YOYO connect
simultaneously, step on front section
of the red pedal on YOYO connect,
or lift from bottom edge.
Use of safety harness
To lock safety harness, let the waist
clip pass through the shoulder clip
and into the crotch buckle.
Adjust length of harness straps to
ensure the safety harness fits your
child snugly.
To unlock safety harness, press the
center section of the crotch buckle.

Publicidad

Tabla de contenido
loading

Tabla de contenido