2.
General view
2.1 View
i
Closed hopper
Coffee type
identification label
Touch Screen
Coffee press
Double-dose
pushbutton
USB plug
Filter holder guide
i
DDDGG
General switch
- General on/off switch.
Located under the coffee
grounds tray.
2.2 Touch screen
The grinder is fitted with a resistant touch screen with which we can access the different menus, which allow for
functions such as:
COUNTERS
CONFIGURATION
Note: Refer to Section 8 – programming, for a description on all the menus and functions of the screen.
Removable hopper
General switch
Check the number of doses used for one and two coffees.
-
Check the number of remaining doses until change of blades.
-
Check the number of doses remaining before brush cleaning.
-
Configure operating mode, "Pre-grind" o "Instant" o "Manual Grind".
-
CLEANING
Adjust the coffee dosage
-
Other functions
-
i
Coffee grounds tray
.
22
Open hopper
Hopper security micro
Upon removing the hopper, the
-
security micro disconnects the
grinder.
Grinding adjustment
knob
Single-dose
pushbutton
Features:
Height: 610 mm.
Width: 193 mm.
Depth: 391 mm.
Weight: 16 Kg.
Hoper capacity: 1.5 Kg.
Power supply: 230 V, 50 Hz.
Nominal Power: 525 W