Care And Maintenance - Axkid Minikid Manual De Instrucciones

Care And Maintenance

The seat cover can be removed and washed in a washing machine at 30º C on the "Gentle
Cycle" programme. Do not put the cover in a dryer as this can damage the cover and the
padding may separate from the fabric.
Any plastic parts of Minikid can be cleaned with mild detergent and water. Do not use
aggressive chemicals containing solvents etc, as this can cause damage to the plastic and
compromise the safety of the child restraint.
All materials used in the Minikid child restraint are recyclable and should be recycled as per
your local legislation. Ask your local recycling centre for advice when recycling this product.
described in this instruction manual. Follow the instructions in this manual carefully. Any repairs
must be carried out by the manufacturer or agent.
If the seat cover needs replacing ensure only original products from Axon Kids are used. If
other products are used the Minikid' s safety system may be compromised and could lead to
severe injury or death in case of an accident.
All materials used have a very high UV-resistance rating. However, UV-light is very aggressive
and will ultimately lead to fading of the seat cover. This is not covered by our warranty as it is
considered normal wear and tear.
Warranty
The Minikid child restraint is covered by a 24 month warranty from date of purchase. Ensure
you save your receipt and bring it to your place of purchase should you have any warranty
issues. The warranty does not cover:
* Normal wear and tear
* Damage due to incorrect use, neglect or accident
* If repairs have been carried out by a third party
8