Reinstalling The Headlight Housing; Replacing The Headlight Bulb Or The Pilot Lamp - SHERCO 250-300 SE/R 2013 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

reinsTalling THe HeadligHT HOUsing

1
3

rePlaCing THe HeadligHT BUlB Or THe PilOT laMP

1
All manuals and user guides at all-guides.com
Connect the electrical connector.
Engage the light plate, ensuring that the holes in
2
the plate
Place all of the brake hoses / cables in the inte-
rior of meter upper guide
Attach the rubber fastners.
Check the setting of headlight beam. (
Remove the headlight housing assembly
(
3
Remove the protective rubber
Turn the socket a quarter turn counterclockwise
to remove it from the headlight assembly.
Gently press the bulb in while turning it counter-
clockwise and remove it from the socket.
Install a new bulb
Headlight bulb S2
Reinstall the socket with the bulb in the headlight
assembly by turning it in a clockwise direction.
2
Reinstall the protective rubber.
To replace the pilot light
socket from the reflector
Pilot light W5W
Reinstall the headlight housing assembly
(
are in place
1
2
3
p.120)
.
2
3
2
p.121)
.
.
p.122)
1
12V 35/35W S2
simply remove the
.
12V 5W
121

Publicidad

Tabla de contenido
loading

Tabla de contenido