Cleaning - Nosiboo Pro Manual Del Usuario

6. Cleaning

1. Remove the connecting tube and the nose tip, then take apart
the Colibri housing.
2. Wash the collared tube, the nose tip, and the Colibri housing in
lukewarm water and dishwashing detergent and let them dry.
Use the brush to clean the nose tip. Use the brush to clean the nose tip.
3. Clean the housing with a dry, soft cloth; do not use any liquids, 3. Clean the housing with a dry, soft cloth; do not use any liquids,
detergents or chemicals. detergents or chemicals.
4. Wipe the connecting tube with a cloth if necessary.
User manual * DMR-01/A05/V08 * 2022-08-07 * Nosiboo Pro Nasal Aspirator * Page: 12/52
!
WARNING
Switch off the device and unplug the unit
from the electrical outlet when assembling,
disassembling and cleaning its parts.
DOs!
Do not wash the housing or the power cord in
water or any other liquid.
Do not handle the power cord with wet hands.
DON'Ts!
Do not wash the connecting tube.
!
CAUTION
Thoroughly clean the Colibri head after use.
Make sure that all parts are dried thoroughly
before the next use.
DOs!
If liquid gets into the connecting tube due to
improper use, make sure that it is completely
dry before using it again.
Do not disassemble the housing.
To avoid damage, make sure the device is not
DON'Ts!
exposed to heat.