Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets - Home Decorators Collection 37803 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
5
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two
screws (HH) and alignment post (KK) in the mounting
bracket (A).
□
Push up the canopy (C) and turn clockwise until the
alignment post (KK) engage to the round hole and the
screws (HH) engage to the key slots.
□
Firmly tighten the two mounting screws (HH).
□
Install the decorative bottom cover (JJ) by aligning the
cover slots with screws in the bottom of the canopy (C).
Rotate the bottom cover (JJ) clockwise to lock in place.

Assembly - Attaching the Fan Blades

1
Attaching the blades to the
blade brackets
NOTE: Your fan features revolutionary advancements for quick
and easy blade installation, including an alignment post and
captive blade bracket screws.
□
Attach a blade (G) to blade bracket (F) by inserting the
screws (DD) into the holes in the blade (G) and through
the blade bracket (F).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
2
Fastening the blade assemblies to
the motor
NOTE: Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
□
Insert the blade/ blade bracket assembly through the hole in the
side of the center flywheel on the fan-motor assembly (E).
□
Align the two screw holes in the blade bracket (F) with the
screw holes in the center flywheel and secure with screws (GG).
□
Repeat these steps for the remaining blades.
10
DD
G
F
E
F
GG
A
HH
C
B
JJ
D
E