Homewerks 75-105-AX Manual Del Usuario página 5

INSTALLATION INSTRUCTIONS (Continued)
5. Using a level, mark the appropriate distance down from
the center of the Z-bar (DD) depending on the size of the
mirror. Drill a 7/32 in. hole at this location and insert a
drywall anchor (BB).
Hardware Used
BB
Drywall anchor
6. Drive the locking screw (EE) into the lower drywall
anchor (BB), leaving 1/2 in. exposed.
7. Connect the white wire from the mirror (A) to the white wire
from the electrical box. Connect the black wire from the
mirror (A) to the black wire from the electrical box. Connect
the green ground wire from the mirror (A) to the ground wire
from the electrical box. Cover and secure each wire connec-
tion with a wire connector (CC).
Hardware Used
CC
Wire connector
8. Carefully attach the mirror (A) to the z-bar (DD), centering it
and ensuring it is secure. The locking screw (EE) will align
with the keyhole bracket on the back of mirror. Once the
locking screw (EE) is aligned through the keyhole slot,
move the mirror slightly to either side to lock it in place.
Once the mirror (A) is securely in place on the Z-bar (DD),
turn on the power at the circuit breaker or reinsert the fuse.
Hardware Used
DD
Z-bar
Locking
EE
screw
Homewerks.com
5
x 1
6
7
x 3
8
x 1
x 1
5
75-105-AX – 20-1/8 in.
DD
75-106-AX – 27 in.
75-107-AX – 33 in.
BB
EE
1/2 in.
DD
EE
A
A