Tineco FLOOR ONE S2 Serie Manual De Uso página 18

Self-cleaning
Brush Roller Cover
Grab the front handle while pressing the button
and pull upward to remove.
②
When replacing, always latch the brush cover into
place to avoid leakage.
1. Place the appliance on the storage tray and plug in.
Press the self-cleaning button and begin the process.
2. Once complete, the appliance will begin charging.
Clean the Dirty Water Tank after cleaning completed.
Note:
• Ensure the appliance is plugged in and the battery level
is >10%.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
①
16
Rinse with water.