7. ACTIVATING AND USING THE ICE MAKER
7.2 Water Filter
The Water Filter makes it possible to have high-quality
water for ice cube production. It can filter up to
3000 litres of water over a maximum time period
of 12 months.
Filter Replacement
The filter (code: Z330001) is located inside the
refrigerator compartment, above the top glass
panel. Prior to changing the filter, switch off the ice
maker by touching the
Ice Maker icon.
Ice Maker
Water Filter
Open the top glass panel and carefully rotate the filter
Water System Purge
cartridge counter-clockwise for one quarter rotation
until it detaches from its housing. It is normal for
a small amount of water to come out. Remove the
cap from the new cartridge and insert it into the
housing by gently rotating it clockwise for one
quarter rotation until it locks into place.
Ice Maker
Water Filter
Access the Menu and use the
icon to select the
Water System Purge
"Manual Clean" function. At the end of the cleaning
cycle, remove the water from the ice tray and wipe
it dry.
If you choose not to use the water filter (if, for instance,
you are connecting the appliance to an already filtered
water source) then it is suggested that you also set
the Water Filter function using the
icon. Touch
Ice Maker
Water Filter
the Reset icon and disable the warning to avoid
Water System Purge
receiving reminders to change the filter (since you
are not using it).
For more details and for how to adjust this
function setting, follow the instructions contained
in this manual in the "Functions" section.
72