Malfunction Messages Appearing On The Display - F.Bertazzoni Heritage Serie Manual Del Usuario

11. TROUBLESHOOTING GUIDE

11.2 Malfunction messages appearing on the display

Display message
Power Failure!!
Upper unit open
Lower unit open
Replace filter
Fresco too warm
Fresco too cold
Refrigerator too warm
Refrigerator too cold
Lower unit too warm
Lower unit too cold
Error Code...
Check condenser
> In the event of a malfunction, touch the Alarm
with its error code.
> The message will be shown for 3 seconds, then it will go back to the home screen.
>
To hold the message on the screen, press the info
the screen for 30 seconds, then it will go back to the home screen.
> In the event that there is more than one error message, the display will show the different fault messages
in chronological order.
82
Malfunction description
Extended interruption of electrical power
The appliance automatically resumes operation and the display shows the
warmest temperatures reached
Fridge door open
This message appears when the door has been open for a few minutes
Freezer door open
This message appears when the door has been open for a few minutes
Replace filter cartridge
This message appears when only 30% of filter capacity remains
Fresco too warm
See Troubleshooting Guide
Fresco too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Refrigerator Compartment too warm
See Troubleshooting Guide
Refrigerator Compartment too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Freezer too warm
See Troubleshooting Guide
Freezer too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Operating problems
Call Customer Care, who may help you to solve the problem or put you in
touch with the nearest Service Agent.
Check Condenser
Every 6 months the display shows the message "Check Cond". Clean the
condenser and press and hold the Enter
button and the display will show the fault message along
(
button for 5 seconds to reset.
Bottle Cooler?
) button on the display. The message will remain on
On Off