Congratulations on your purchase and thank you for choosing our unit.
Our goal is to fully satisfy customers by offering them cutting-edge systems for the treat-
Carefully read this instruction manual and store it for future reference. Only use the
accessories as described in this manual. This is a medical device intended to nebu-
lize and administer medications prescribed or recommended by a doctor. Visit our
Internet site www.flaem.it to view the whole range of Flaem products.
ACCESSORIES THAT CAN BE USED
WITH THIS NEBULIZER
1 - Pediatric nasal prong
2 - Adult nasal prong
3 - Pediatric face mask
4 - Adult face mask
5 - Mouthpiece with valve
5.1 - Exhalation valve
6 - Non-invasive nasal prong
7 - Baby mask set (see its instruction
manual)
8 - Nebulization manual control
9 - Connector
10 - 1 or 2 m Connection hose
WARNINGS
- This is a medical device (compliant with Dir. 93/42/EEC) and may only be used with med-
ication prescribed or recommended by a doctor. Before using the accessories, consult
the instruction manual of the device. It is important that the patient reads and under-
stands the information on how to use the device and the nebulizer. Contact your retailer
or nearest service center for any questions.
- The expected medical life of the accessories is 1 year. It is, however, advisable to replace
the nebuliser cup every 6 months in the event of intense use (or earlier if the cup is ob-
structed) to always guarantee maximum therapeutic efficacy.
- Children and disabled persons should always use the nebulizer under strict supervision
of an adult who has read this manual.
- The nebulizer contains small parts that may be swallowed by children; keep therefore
the nebulizer out of the reach of children.
ASSEMBLING THE NEBULISER
Follow the assembly instructions below.
1. Assemble the nozzle (11.3) on the upper part (11.2).
11.2
11.3
AEROSOL THERAPY NEBULIZER
ment of respiratory tract ailments.
8
NEBULIZER
11- RF9 Nebulizer
11.1 - Complete particle size regulator
11.1a - Regulator
11.1b - Valve
11.1c - Selector
11.2 - Upper part
11.3 - Nozzle
11.4 - Lower part
11.2
11.3