Cooper Lighting Solutions WaveLinx Pro WAC2-POE Instrucciones De Instalación página 4

WaveLinx Pro
Wireless Area Controller
[119mm]
4.69"
[119mm]
Installation
The Wireless Area Controller (WAC) must be installed in accordance with all local, state, and national electrical codes and
requirements. Before mounting the WAC in its final location:
1. Install WaveLinx Pro wireless devices and verify out-of-the-box functionality
2. Mount the Wireless Area Controller (WAC)
• Ensure the WAC is roughly central to the devices with which it is communicating.
• Review the "Where to Mount" section of this installation instruction.
• The WAC can be mounted on a shelf, wall, DIN rail or ceiling using the included mounting bracket
• Ensure the surface the WAC is mounted against is not made of concreate, metal or other material that would reduce the
wireless communication.
IB503099ML page 4
December 2021
4.69" 1.97"
[50mm]
4.80"
[122mm]
• Mounting hole locations 1.5" (38mm)
• Use #6 screws (provided by others) for mounting
Wireless Area Controller (WAC2-POE)
www.cooperlighting.com