Fixing The Supports - VOLTOMAT HEATING VOLCW Manual De Instrucciones

and an even distribution of heat, the lower part of the product, once mounted on the wall, must be at least
10-12cm from the floor, and 30cm at the most. As for the sides and above, a minimum distance of between
10-12cm must be left from any wall or brickwork in order for it to function correctly (Figure 2).

2.2. Fixing the supports

Inside the packaging you will find a fixing kit. Please find the instructions below:
1. Choose the right part of the
wall.
2. Place the mounting stencil on
the wall, marking the places for
the holes.
3. Remove the stencil and make
the holes in the wall.
4. Fix the supports using the
plugs and screws provided, or
others suitable for the wall type.
M i n i m
u m
1 0 c c m
c
.
5. Check the correct positioning
of the lower support.
6. Align the product with the top
supports.
7. Place the product in the
supports.
21