Unpacking Instructions; Electrical Connection / Grounding Instructions - Avanti MOTR14K3S-IS Manual De Instrucciones

Carefully remove oven from carton.
SAVE THE CARTON AS IT MAY MAKE INSTALLATION EASIER.
Remove:
1.
All packing materials from inside the oven cavity; however, DO NOT
REMOVE THE WAVEGUIDE COVER, which is located on the side in the
oven cavity. Check to see that there are Installation Instructions, Wall
Template, Top Cabinet Template, bag of Installation Hardware, Charcoal Filter
and Exhaust Damper Assembly. Read enclosures and SAVE the Owner's
Instructions.
2.
The feature sticker from the outside of the door, if there is one.
Check the oven for any damage, such as misaligned or bent door, damaged door
seals and sealing surfaces, broken or loose door hinges and latches and dents
inside the cavity or on the door. If there is any damage, do not operate the oven
and contact your dealer.
See Installation Instruction for more details.
ELECTRICAL CONNECTION / GROUNDING
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING- Improper use of the grounding plug can result in a risk of electric
shock.
Consult a qualified electrician or serviceman if the grounding instructions are not
completely understood or if doubt exists as to whether the appliance is properly
grounded. If it is necessary to use an extension cord, use only a 3-wire extension
cord that has a 3-blade grounding plug, and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating of the extension cord shall be equal
to or greater than the electrical rating of the appliance.

UNPACKING INSTRUCTIONS

INSTRUCTIONS
8