Environment; Trouble Shooting - MaxPro PROFESSIONAL MPHG2001 Manual De Instrucciones

ENVIRONMENT

Do not dispose of electric tools, accessories and packaging together with household waste material -
in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility.

TROUBLE SHOOTING

Fault Symptom
The machine does
not work.
The air volume is
null or small.
The machine runs,
but the air outlet
does not have heat.
The noise produced
by the machine is
too big.
The machine cannot
be shifted among
the level 1, the level
2 and the level 3.
The rated power of
the machine is not
reached.
Possible Cause
The plug is not inserted into the power
socket.
The power is cut off.
The switch is not turned on.
The switch is in poor contact.
The internal direct-current motor is
damaged.
The air deflector at the rear part of the
motor is damaged.
The air outlet is blocked by foreign
matters.
The heating wire is damaged.
The direct-current motor is faulted.
The fan blade of the motor is damaged. Request a professional to inspect the fan
The fan blade of the motor rubs the
body of the motor.
The switch is damaged.
The diode which is welded on the back
of the switch is damaged.
Circuit overload is caused by
illuminating and public equipment or
other electric appliances.
Troubleshooting
Insert the plug into the power socket.
Repair and connect the power.
Turn on the switch.
Request a professional to replace the switch.
Request a professional to inspect and replace
the motor.
Request a professional to inspect and replace
the air deflector.
Please check and remove the foreign matters
which block the air outlet.
Request a professional to replace the heating
wire.
Request a professional to inspect the motor.
blade.
Request a professional to inspect the fan
blade.
Request a professional to inspect and replace
the switch.
Request a professional to inspect and replace
the diode.
Do not use other public equipment or electric
appliances in the circuit which is connected
with the machine.
GB 7