Tabla de contenido
Publicidad
Active Bike wheel assembly instructions
Method:
1. Remove the front wheel from the packaging
2. Remove the quick release from the front wheel
3. Connect the quick release to the fork
4. Remove and install the front mudguard and headlight with the bolt, nut and washers provided
5. Tighten the mudguard rods on the fork
6. Ensure that the brake caliper does not come into contact with the rod
7. Adjust the stem closing mechanism
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with
assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.argentobike.com for technical
support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair efficiency, reduce structural integrity
and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory defects, unusual
noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.argentobike.com for technical support.
10
Publicidad
Tabla de contenido
