Wireless Control Configuration - Planika Porto Manual De Montaje

To pair the device with the mobile app (simultaneous pairing of more than one device is not possible):
Join the newsletter
FLA3
1. Launch the
NET-ZERO
mobile
app. Join the newsletter
by submitting your e-
mail address and
pressing SIGN UP or
simply press SKIP.
3. Press and hold the WiFi button
for 5 minutes.
Setup Network Active
4. Go to mobile device setup,
turn on the WiFi network
and connect with
Fireplace_WiFi_setup (if
the network is not visible,
unplug the device for 10
seconds and retry the
configuration). The
fireplace will be
automatically found by the
mobile app, which will be
confirmed by the app
(SETUP NETWORK
ACTIVE). Press
CONNECT.

WIRELESS CONTROL CONFIGURATION

on the fireplace. When the button starts flashing, the fireplace is ready to be paired
11
Find your fireplace
On the FIND YOUR
2.
FIREPLACE screen
press CONNECT to
start the network
search.
Connect to Home Network
On the CONNECT
5.
TO HOME
NETWORK screen,
choose the name of
the network which
you plan to use by
default (NETWORK
NAME) and submit its
password. Make sure
the password is
correct and hit
(SUBMIT).