Product Usage; Charging The Battery - VALBERG CYCLONIC-S10 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

B

Product usage

Charging the battery

The battery must be charged before first use and whenever the vacuum will not turn on
because the battery is too low.
NOTE: When the power is too low and the battery needs to be charged, the vacuum
will automatically turn off.
Insert the charger into the battery charging port.
Insert the plug into the mains socket.
It takes approximately 6 hours to fully charge the battery for the first time. Any subsequent
charges will then take up to 3 hours.
The different battery LED indicator statuses are indicated below:
LED indicators
1 LED indicator flashing
1 LED indicator lit
1 LED indicator lit
1 LED indicator flashing
2 LED indicators lit
When the battery is charged, the usage times are as follows:
Vacuum type
Handheld vacuum
Stick vacuum
WARNING!
After charging, always unplug the charger from the battery charging port
and mains socket.
Do not charge the battery at temperatures below 5°C or above 40°C.
CAUTION: To recharge the battery, only use the removable power supply unit
supplied with the device. MC2805B-V
Battery level
Battery low - Charge the vacuum
50%
50% and charging
100% (once fully charged for 10 minutes, the LEDs
will turn off.)
Level 1 (low)
Level 2 (medium)
55 minutes
48 minutes
16
EN
Level 3 (high)
25 minutes
10 minutes

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

972027

Tabla de contenido