Use And Operation - Newlux WindPure Mist W500 Smart Manual Del Usuario

USE AND OPERATION

Before each use, check the unit is in good condition and the power
cable is not damaged. If the power cable is damaged, contact the
seller or the Technical Support Service (TAS).
Filling the tank
1. Remove the
water tank.
WARNING: Make sure the product is unplugged from the mains
before filling or refilling the water tank.
Use only cold or lukewarm water in the tank. It should be no hotter
than 40ºC. Do not add chemicals, oils or other additives.
| 26
2. Unscrew the
cover at the
bottom.
3. Fill it with water
and screw on the
lid.