Automatic Display Darkening Setting; Dimmer Setting; Automatic Power Saving Setting - Esoteric N-01 Manual Del Usuario

Setting items and their options (continued)

Automatic display darkening setting

DPaOFF> ***
You can set the display to darken automatically after a set amount of
time has elapsed.
o By default, the setting is ON.
ON
The display will automatically darken after 10 minutes elapse with-
out any operation or change in the information shown.
OFF
The display will not automatically darken, but if nothing changes
for 10 minutes, its brightness will be lowered to the level of
DIMMER>1 to reduce long-term display fading.
o We recommend setting this to ON because brightness irregulari-
ties might occur if the same information is shown without change
on the display for a long time.

Automatic power saving setting

APS> ***
o By default, the setting is 30m.
When the input source is XLR, RCA, OPTICAL or USB, the unit will turn
off automatically if the set amount of time passes without being able
to lock an input signal from the selected input source.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
18

Dimmer setting

DIMMER> ***
You can adjust the brightness of this unit's display and indicators.
DIMMER>3
c
DIMMER>2
(normal brightness)
c
DIMMER>1
c
(off )
o The dimmer of this unit can be adjusted using the DIMMER but-
ton of a remote control included with another ESOTERIC product.
o Even when set to DIMMER>1 or off, a brighter setting will be used
when displaying error messages and setting menus.