Cleaning And Maintenance - Ga.Ma SALON EXCLUSIVE PRO 9 XPERT Manual De Instrucciones

CUTTING LENGTH ADJUSTMENT:
The PRO9 XPERT hair clipper offers the possibility of making finishing touches from 0.8 mm to 3.8 mm (if used
without any guide comb attached and using the adjustment lever) and performing classic hair cuts with the
following lengths: 3, 6, 10 and 13 mm.

CLEANING AND MAINTENANCE:

A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
Fig.2
ADJUSTABLE LEVER:
The lever for adjusting the cutting length is located on the left side of the
body of the appliance (Fig. 4); this lever lets you adjust the cutting length to
0.8 mm if held upwards, i.e. towards the upper body of the appliance, or 3.8
mm if held downwards, i.e. towards the rear body of the appliance.
Fig.3
16