Publicidad
Idiomas disponibles
Idiomas disponibles
Working range ....................................... Ø 40 - 110 mm
Positioning transmitter ........................... 512 Hz
Pressure resistance .............................. 1 bar/ 10m water column
Explosion protection .............................. No
Modul ROLOC PLUS HD:
Functioning Range ................................. depth 0.6 – 1.8m (2' - 8'), horizontal 0 – 4.5m (0' – 15')
Deviation and maximum range always depending on SONDE, soil, pipe material etc.
Frequencies............................................ 512 Hz, 640 Hz, 50/60 Hz passive, 33 KHz aktiv/passiv
Weight .................................................... 3 lbs. 4.91 oz/ 1.5 Kg
Dimensions:
Length .................................................... 25"/ 63.5 cm
Width ...................................................... 12.5"/ 31.75 cm
Height ..................................................... 4"/ 10.16 cm
Operating Environment:
Temperature ........................................... 0°C to 40°C (32°F to 104°F)
Humidity ................................................. Maximum of 95% non-condensing (display unit)
Storage Temperature ............................. –20°C to 60°C (-4°F to 140°F)
3
Technical Data charger and battery
Battery:
U = Voltage
C = Capacity
W = Weight
Ic = Charge current
t
= Approx. charging time (90% full)
Charging voltage ...........20,75 V DC
Charging temperature .. 0° - 50° C, 32° - 122° F
Max. discharging
temperature. .................. 5° - 50° C, 41° - 122° F
Recharge battery pack before first use!
4
Function of the Unit
4.1
Overview
1
Camera head
2
Positioning probe
3
Bending spring
4
Reel cable
5
Monitor unit
5.1
Push button monitor unit
6
Reel
4.2
Working notes
- Do not bend the reel cable! The cable may break!
- Do not pull the reel cable over sharp edges! The cable may become damaged!
ATTENTION! Always protect ROCAM mini HD against water, and use only recom-
mended indoors. Only the camera head (1) and reel cable (4) may come into contact
with water!
Charger:
U1
= Input voltage
f1
= Input frequency
P1
= Input power
U2
= Charging voltage
I2
= Max. charge current
Nc
= No. of battery cells
W
= Weight
Pay attention to the electrical outlet
voltage! Check the label on the
bottom of the charger!
7
Frame
8
Holder
9
Camera cable
10
Monitor bracket
11
Battery release
12
Battery
ENGLISH
(B)
(A)
21
Publicidad
