Kenwood DNR1008RVS Guia De Inicio Rapido página 18

USB/SD/iPod/iPhone
USB/SD/iPod/iPhone
Connecting a USB device
1
Connect the USB device with the USB
cable. (P.36)
2
Press the [ ][HOME] button.
3
Touch [
].
4
Touch [USB]. (P.12)
Ñ
Disconnect the USB device
1
Press the [ ][HOME] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.
18
Inserting the SD
1
Tilt the panel toward you manually.
2
Insert the SD card into the slot until it
clicks.
3
Close the panel.
4
Press the [ ][HOME] button.
5
Touch [
].
6
Touch [SD]. (P.12)
Ñ
Remove the SD card
1
Press the [ ][HOME] button.
2
Touch a source other than [SD].
3
Tilt the panel toward you manually.
4
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
5
Close the panel.