Publicidad
Idiomas disponibles
Idiomas disponibles
Use with Strollers
see images
-
38
47
Your enhanced infant child restraint is designed to attach to certain
Joie stroller models featuring a special tray, armbar or calf support.
!
Please make sure your stroller can fit the infant child restraint before
purchasing it.
!
Never allow more than one baby in the travel system at one time.
!
Please brake your stroller before assembling the enhanced infant
child restraint.
!
Check that the parts used to fix the enhanced infant child restraint
are securely fastened on the stroller.
!
Recline the stroller seat back to the lowest position.
Use with Joie Strollers
To assemble the enhanced infant child restraint on Joie strollers,
please follow these steps:
1. Place enhanced child restraint into stroller so notches in rockers fit
over edge of armbar, tray or calf support. The enhanced child
restraint will then automatically click into place.
!
If armbar has fabric cover, please detach the Velcro on armbar cover
first.
-1
40
!
For the stroller with a special calf support, please adjust the calf
support to the vertical position, detach the Velcro, and then lift the
fabric cover.
-1
41
2. Use the straps on both sides of stroller to fix the enhanced child
restraint.
&
&
42
43
44
!
Try pulling the enhanced child restraint upwards to check that it is
fitted correctly.
17
&
&
&
38
39
40
41
To remove the enhanced child restraint, release the straps from the
enhanced child restraint, pull up the stroller release handle to release
the enhanced child restraint from tray, armbar or calf support, and then
lift enhanced child restraint out of stroller. Please refer to
Care and Maintenance
!
After removing the foam wedge of insert
that the child cannot access it.
!
Please wash the seat cover and inner padding with cold water under
30°C.
!
Do not iron the soft goods.
!
Do not bleach or dry clean the soft goods.
!
Do not use undiluted detergents
wash the infant carrier module or base. It may cause damage to the
enhanced infant child restraint.
!
Do not twist the seat cover and inner padding in an attempt to dry. It
may leave the seat cover and inner padding with wrinkles.
!
Please hang dry the seat cover and inner padding in the shade.
!
Please remove the enhanced infant child restraint and base from the
vehicle seat if not in use for a long period of time. Put the enhanced
infant child restraint in a cool, dry place and somewhere your child
cannot access it.
&
45
46
,
please store it somewhere
,
gasoline or other organic solvent to
&
.
47
18
Publicidad
