EN
DESCRIPTION
- The SA series power amplifiers offer great power and sound quality with high performance and stability.
- High reliability with: soft start, forced ventilation with variable speed and protection circuits (temperature,
short circuit, overload, DC and AC).
- Audio inputs with market standard connections: XLR and 6.3 mm jack and volume control for each
channel.
- Speaker outputs with screw terminals and banana plugs or speaker connector.
CONTROLS AND FUNCTIONS
FRONT PANEL
1
POWER
1.- Device on/off switch.
2.- CLIP: LED signal peak indicators for each channel. If they light up slightly or occasionally the output
volume must be reduced. If the LED indicator remains permanently lit, this is due to the input signal
being at a very high level. In this case, reduce the input signal volume.
3.- Volume controls for each channel.
4.- STR: LED STEREO mode indicator.
5.- BRI: LED BRIDGE mode indicator.
6.- PAR: LED PARALLEL mode indicator.
7.- PROTECT: LED protection indicator. It lights up when the temperature, surge or short circuit amplifier
protection is activated. With the protection activated the audio output is cut off. In this case, switch off
the amplifier, correct the problems which have caused the fault and let the device reset itself for a few
minutes before switching it back on.
8.- POWER: LED power indicator.
REAR PANEL
1.- HIGH/BYPASS/LOW: high pass, bypass and low pass filter selector for each input channel.
2.- INPUTS: channels A and B aux line level signal balanced inputs, XLR connectors and 6.3 mm jack.
3.- LIMITER: input signal limiter.
CH B
HIGH
LOW
≃
230 V AC, 50 Hz
3,000 W
FUSE: 25 A
(1+, 1-)
CH B
6
7
2
CLIP
MIN
CH A
1
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
BYPASS
CH B
HIGH
LOW
≃
230 V AC, 50 Hz
3,000 W
FUSE: 25 A
(1+, 1-)
CH B
6
7
HIGH
LOW
OUTPUTS
+
+
_
_
(1+, 1-)
CH A
8
9
3
4 5 6
3
2
CLIP
STR
BRI
PAR
PROTECT
POWER
MAX
MIN
MAX
CH B
7
8
3
4
5
2
INPUT
BRIDGE
STEREO
PARALLEL
LIFT GND
ON
OFF
LIMITER
BYPASS
HIGH
OUTPUTS
+
+
_
_
(1+, 1-)
CH A
8
- 2 -
CH A
SA-1208
POWER AMPLIFIER
900 + 900 W RMS, 4
600 + 600 W RMS, 8
1,600 W, BRIDGE 8
BRIDGE
POWER AMPLIFIER
1
CH A
LOW
SA-1208
POWER AMPLIFIER
900 + 900 W RMS, 4
600 + 600 W RMS, 8
1,600 W, BRIDGE 8
BRIDGE
9
SA-1208