VITO VM Manual De Instrucciones página 10

11. Trouble shooting
Malfunction
Power indicator (red LED) (1)
remains inactive
VITO is very noisy during operation
Power indicator (red LED) (1)
flashes and acoustic signal sounds
Power indicator (red LED) (1) and filter
indicator (green LED) (2) flash and an
acoustic signal sounds
VITO doesn't start
Line fuse / Ground fault circuit fuse
(GFCI) blow-out
Low filtration performance
Oil splashed sideways and / or at the
back of the pump-filter unit (11)
Power and filter indicator (1 & 2) flash
10 sec. after plugging VITO in and an
acoustic signal sounds
Internet connection cannot be estab-
lished
"10.10.10.10"-website is not
displayed correctly
Gap between control unit (8) und
pump-filter unit (11)
If you find any faults not listed here, please contact the VITO customer service or your dealer!
Contact details can be found in chapter 2. Legal information.
12. Waste disposal
12.1 Packaging disposal
• The packaging should be recycled
or
• keep the packaging carefully.
12.2 Particle filter disposal
• Used particle filter must be disposed according to your local regulations.
Possible cause
• Power cord (10) not plugged in
• Power cord (10) defective
• Device defective
• Star handles (7) are loose
• Rotor defective
• Rotor scratches on the fryer
• Overtemperature
• VITO is at an angle of more than 17°
• Strong vibrations
• Control unit (8) defective
• Power cord (10) or other electrical
components defective
• Rotor defective / blocked
• Circuit overloaded
• Particle filter is full
• Pump-filter unit (11) clogged
• Filter paper not inserted properly
• Motor defective
• Particle filter full
• Too much space between filter
cover and pump-filter unit (11)
• Filter paper not inserted overlapping
• Start / Stop button (5) defective
• Control unit (8) wet inside
• Wrong network chosen
• Wrong password entered
• WiFi signal too weak
• Outdated website in cache
• Device is not connected to VITO
• Filter cover not closed properly
• Filter cover or pump-filter unit bent
Remedial action
• Plug in VITO
• Please contact service
• Please contact service
• Tighten star handles (7)
• Please contact service
• Change position of VITO in deep fryer
• Let VITO cool down
• Place VITO in a cool place
• Check position of VITO in the fryer
• Please contact service
• Damaged rotating parts
• Filter cover not closed properly
• Please contact service
• Please contact service
• Please contact service
• Change socket/circuit
• Change particle filter
• Empty pump-filter unit (11)
• Boil out to remove heavy dirt
• Insert filter as described
• Please contact service
• Change particle filter
• Please contact service
• Insert particle filter as described
• Please contact service
• Please let it dry
• Select correct network
• Enter correct password
• Strengthen the WiFi signal
• Move router closer to VITO
• Delete Cache
• Delete browser data
• Connect to VITO (see chapter 6.5)
• Close the filter cover properly and snap
it into the pump-filter unit
• Please contact service