Tineco PWRHERO XL Manual De Uso página 10

Operation
Preparing for Use
Note:
• Before the first use, please charge the vacuum for 4-5 hours in an area where the ambient
temperature is between 39.2°F (4°C) and 104°F (40°C).
Place foot on floor nozzle and tilt handle back
to begin cleaning.
1. Press the power button once to turn on the
barefloor setting, the brush roller will spin
slowly to vacuum up litters on bare floors.
2. Press the power button a second time to turn
on the carpet setting, the brush roller will
spin quickly in this mode to get deep carpet
cleaning.
3. Press the power button a third time to turn off
the vacuum.
Runtime
• When in BAREFLOOR mode, the runtime is 30 minutes. When in CARPET mode, the runtime is
10 minutes.
• Estimated runtime data was obtained by Tineco Laboratory.
Indicator
ERROR
Check troubleshooting if blinking
or light.
BATTERY
• Blinking blue light: no power.
• Breathing blue light: in charging.
• Solid blue light in 3 minutes: full
charging, then light off.
BAREFLOOR Mode.
CARPET Mode.
8
POWER BUTTON
MODE SWITCH
ERROR
BATTERY
BAREFLOOR
CARPET