Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING THE LIGHT BULB
•
Before changing the lights, make sure that the appliance is plugged off.
•
Protect against danger when changing lights, such as wearing gloves.
Use the screw driver loosen the ST4*8MM self tapping screw (2pcs) from the
lighting panel, take out the lighting fixture. Open the terminal box that connected
with the wire, disconnect the wire connector and replace the lamp.
•
ILCOS D code for this lamp is: DBS-2/65-H-120/33
•
Max wattage: 1×2 W
•
Voltage range: AC 110-240V
•
Dimensions:
EN
39
Publicidad
