CE-ART 7W/G2+ GUARD UNIT
( )
*
Description of the
guard unit
when receiving a call and during communication
A
Door panel call screen
17-12-2019
11:17:10
Door panel 1
2
1
The
A
screen is displayed when receiving a call or pressing icon
displayed on the screen will blink green (during the call process). In the top centre of the screen, the date
and time are shown and, on the right, the source of the image is displayed. The call has a duration of 45
seconds.
The
B
screen is displayed during a communication process. In the top centre of the screen, the date and time
are shown and, on the right, the source of the image is displayed Communication has a maximum duration
of 90 seconds.
The ringtone ends.
Access the image and communication settings menu.
Change the source of the image as long as the system has more than one door panel or has an
external camera connected and display has been activated (see guard unit manual and door
panel manual). It is possible to make the change during display, call and communication
processes.
Start
audio
or end
the
has a maximum duration of 90 seconds. Once communication has ended, the screen will
turn off.
Activate the lock release (or device connected to the
(factory setting, programmable by the installer; see guard unit manual and door panel manual).
1
During activation, indicator
will illuminate.
Activate the lock release (or device connected to the relay output of the door panel) for 3 seconds
(factory setting, programmable by the installer; ee
2
During activation, indicator
will illuminate.
A few seconds after receiving a call, it automatically takes a photograph. In the top left of the screen,
icon
is displayed and indicator
By pressing, it takes a photograph.
(See
if you have a MicroSD card inserted, it starts recording a 15-second video within a few seconds of
receiving the call. Otherwise, it will take a photograph. In the top left of the screen, icon
displayed and indicator
will illuminate.
By pressing, it records a video.
(See guard unit manual
( )
For more information, see
"T
CE-
ART 7W/G2+
*
https://doc.golmar.es/search/manual/50122531
:
B
Communication screen
17-12-2019
11:17:10
2
1
of the main menu. During a call, icon
.
End
the
communication with the door panel and then show
the main menu.
communication with the door panel displayed. Communication
relay
output of the door panel) for 3 seconds
s
guard unit manual and door panel manual).
will illuminate.
guard unit
manual to set the recording mode).
to set the recording mode
).
user manual
(cód. 50122
531
)"
4
Door panel 1
.
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
is
Golmar reserves the right to make any modifications without prior notice.
EN
CE-ART 7W/G2+
GUARD UNIT
12 1
-0 -202
3
Jue
09 : 27
Placa
Intercomunicación
Grabaciones
QUICK GUIDE
Golmar se réserve le droit de toute modification sans préavis .
TCE-ART 7W/G2+ E GR
golmar@golmar.es
www.golmar.es
Sistemas de comunicación S.A.
Ajustes
N
REV.0 23 V01
1
EN