Publicidad
Idiomas disponibles
Idiomas disponibles
Door reversal instructions
Note: Ensure that the rubber gaskets seal tightly
around the perimeter of the door before tightening
the hinge screws.
1. Make sure that your appliance is unplugged.
2. Remove the hinge cover and top hinge from the
top right side of the cabinet. Remove the screw hole
cover from the top left side of the appliance.
3. Remove the door.
4. Remove the screws securing the bottom hin-
ge to the right-hand side of the cabinet, then
remove the hinge. Remove the adjustable foot
on the left.
5. Remove the adjustable foot on the lower hinge
shaft, and remove the washer and nut.
6. Rotate the lower hinge 180°.
7. Insert the washer and nut into the hole in the pin
shaft, then install the adjustable foot.
8. Install the lower hinge on the left side. Install the
adjustable foot on the right side.
9. Remove the screw securing the door stop from
the bottom right, then remove the door stop and
install it on the bottom left.
10. Install the door.
11. Move the door cover from the top right side of
the freezer door to the top left side of the door. And
move the cover from the left hole to the right side.
12. Attach the top hinge to the top left-hand side
with the three screws removed earlier. Make sure
that the top of the door is level and that the rubber
gasket makes a good seal.
34
English
infiniton.es
Publicidad
