Optika Italy B-510 Serie Manual De Instrucciones página 13

10. Use of the microscope
10.1 Turning on the camera
The LED indicator ① (Fig. 13), when the power supply is
•
connected but the camera is switched off, is red.
1. When the ON/OFF button is pressed, the LED ② starts flash-
ing blue for a few seconds.
2. Once the switching sequence is complete, the LED ② is
steady blue.
3. The camera is ready to work.
10.2 Turning on the monitor
1. Press the POWER button
monitor (Fig. 14) to turn on the monitor.
• The monitor takes a few seconds to become operational.
10.3 Turning on the microscope
1. Operate on the light intensity adjustment knob
ON/OFF the microscope and to increase/decrease the
illumination voltage. (Fig. 15)
placed on the left side of the
③
④
③
to turn
Page 13
②
①
F ig. 13 F ig. 13
F ig. 14 F ig. 14
④
F ig. 15 F ig. 15