Ruark Audio R2 Guia Del Usuario página 13

Bluetooth
Your R2 radio is Bluetooth enabled and can receive
audio streamed from a Bluetooth smartphone, tablet
or laptop.
Connect your Bluetooth device
Change source to Bluetooth, your R2 will show
"Connecting...", the indicator light on the dial will
flash and your R2 will attempt to connect to the last
connected device.
If it cannot connect to the last connected device, it
will show "Discoverable as R2".
If you do not connect within a few minutes, your
R2 will stop attempting to connect and show "No
connection".
Play audio
Once connected, audio from your Bluetooth device
will play through your R2. For more information on
playing audio from your Bluetooth device, refer to
your device's documentation.
Please note that you may need to select Ruark R2 or
Bluetooth as the audio output on your device.
Pause track
Press and then press again to play.
Skip track
Press or to skip to the next or previous track.
Now Playing information
MENU > Info
Artist, album and track name will show if your
Bluetooth device and app support Bluetooth
metadata. You can also show the name of the
connected device.
Operating range
This is typically up to 10 metres from your R2,
although obstructions such as walls may reduce this.
Adjust volume
Adjusting the volume on your Bluetooth device will
automatically change the volume on your R2.