ELECTROTEK ET-CR111 Manual De Instrucciones página 6

smoothness is obtained. Warning: Do not use in the same
area for more than 3-4 seconds at a time. Stop if skin
becomes sore or inflamed.
5. Turn the unit off by pushing the on/off button downwards.
6. Wipe it rinse feet to remove excess dead skin particles.
7. Thoroughly dry feet.
8. Apply moisturiser and massage into your fabulously
smooth feet.
CLEANING AFTER USE
The callus remover is not waterproof. Detach and wash the
roller head to clean the surface.
1. Turn the unit off.
2. Remove the roller from the unit by pressing the eject
button on the side of the unit and gently pulling the roller
away from the unit.
3. Rinse the roller head under the tap.
4. Clean the body of the unit with a clean damp cloth.
5. Dry both the roller head and main unit with a clean dry
cloth.
6. Replace the roller and the protective cover.
CHANGING THE ROLLER HEAD
Replace the roller head when you find it has become less effective.
1. Ensure that the unit is turned off.
2. Remove the roller from the unit by pressing the Eject
button on the side of the unit and gently pulling the roller
away from the unit.
3. Place the new roller into the unit by pressing the pins on
either side of the roller head and inserting the head into
the device. Check that the roller head is securely attached
to the device before use.