Chamberlain Bilt C2212T Manual De Instalación página 37

myQ App Control
®
Connect With Your Smartphone*
YOU WILL NEED:
Wi-Fi enabled smartphone, tablet or laptop
®

Broadband Internet connection

Wi-Fi signal in the garage (2.4 GHz, 802.11b/g/n required), see page 5
®

Password for your home network (router's main account, not guest network)

myQ ® serial number located on the garage door opener

DOWNLOAD THE myQ® APP TO SET UP AN ACCOUNT AND CONNECT
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door
openers also receive software updates to ensure the opener has the latest operational features.
The garage door opener must run through a complete cycle before it will activate Wi-Fi® programming.
1. Download the myQ App.
®
2. Set up an account and connect.
If you already have the myQ ® App installed:
1. Check that your mobile device has the latest software.
2. Download the latest version of the myQ® App.
For more information on connecting your garage door opener, visit support.chamberlaingroup.com.
NOTES:
To erase the Wi-Fi settings from the opener, see page 39.
®
Google Play and the Google Play logo are trademarks of Google LLC.
App Store and the Apple and App Store logos are trademarks of Apple Inc.
*Smarphone control is not available on models C2102 and D2101.
Wi-Fi Status
LED Definition
Blue Off - Wi-Fi is not turned on.
®
Blinking - Garage door opener is in Wi-Fi
Solid - Mobile device connected to the garage door opener.
Blue and Green
Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and garage door opener is connected to the Internet.
®
37
Learn
Button
LED
An LED on the garage door
opener will indicate Wi-Fi
status. See table below.
® learn mode.