EN – 9
Changing ear cushion
1
2
1
2
2
4
3
Notice
The products, batteries and ear cushions should be taken to separate waste collection points designated by
local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner
that conserves valuable materials and protects human health and the environment.
Please hold the auricle firmly with one hand (1) during the change, as the swivel
joint could break if too much pressure is applied.
Start at the top of the cushion (2) and then go between the cushion and the
headset, for example, with the thumb nail of your thumb. In this way you can
remove the cushion step by step.
Please be careful not to make any twisting movements, as the protrusion inside the
headset could possibly be damaged.
When fitting the new cushion, please check that it is in the correct position - notch
(3) in the ear cushion and protrusion (4) on the headset serve as positioning aids.
Simply start there and then carefully clip in the complete cushion.