Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
REASSEMBLY
WARNING: Always have screen in place before operating firebox insert. This prevents
excessive temperatures on fireplace surfaces.
WARNING: Failure to position the parts in accordance with these diagrams or failure to
use only parts specifically approved with this fireplace may result in property damage
or personal injury.
1. Install the frame by screwing in top two
screws, open the bottom grill and screw in two
bottom screws and center nut.
Top
Screw
Bottom Screw
(Behind bottom grate)
Nut
(Behind bottom grate)
2. Replace burner and tighten all 9 screws
3. Replace the hood and tighten the 5
screws holding it in place. (Only 4 screw for
Intermediate size)
Hood
Top
Screw
Bottom Screw
(Behind bottom grate)
4. Assemble Logs (see next page)
5. Replace the screen
Screen
21
Louver
Sheet Metal
Screws
Shoulder
Screw
Firebox
Top
Publicidad
