Publicidad
Idiomas disponibles
Idiomas disponibles
view if no camera has been connected to both the doorway or rear position,
or the sharkfin camera will be paired to the spare position (doorway/rear)
automatically.
9. To check the pairing status of each camera, return to the Camera Pairing page
or enter the Camera Status page, the
successfully. If
10. Erect antennas on the monitor and cameras (if available) and ensure the signal
strength is OK.
Activate the Monitor
When the monitor is off, press the power button on the back of the monitor to turn it
on. When the monitor is on, press the power button to bring up the menu setting page.
NOTES:
–
The rear or doorway camera transmits a clear and wide image with audio from
the area behind the vehicle or at the vehicle door to the monitor inside. To avoid
unnecessary noise when the vehicle is moving, you can mute your vehicle
speaker system.
icon is shown, please check the signal strength.
- 18 -
icon indicating the camera is paired
OR
CCD-0005512 Rev: 03-20-22
Publicidad
