STEINEL MobileGlue 1007 Manual De Instrucciones página 11

Button LED red
ON
Technical Specifications
Dimensions (H × B × T):
Battery:
Battery voltage, capacity:
Rechargeable-battery run time:
Battery charging time:
Warm-up time:
Melt temperature:
Recommended glue sticks:
Disposal
Electrical and electronic equipment,
accessories and packaging must be re-
cycled in an environmentally compatible
manner.
Do not dispose of electrical and
electronic equipment as domes-
tic waste.
Operation / glueing
LED green
Switch ON. Press button for approx. 2 sec.
Green LED flashes for 15 sec.
Applicator ready for use
Applicator starts for a further 5 min. each time you
press the trigger
No glueing for 5 min.
Applicator switches OFF
Switch applicator back ON at button
Red and green LED flashes alternately after
applicator has been in use for approx. 20 min.
The applicator can now only be used for approx.
another 10 min.
Red LED flashes 1×
Battery flat, start charging using USB charger
MobileGlue 1007
157 × 47 × 158 mm
lithium-ion
3.6 V, 1.5 Ah
approx. 30 minutes (continuous operation)
90% in 3 hours
less than 15 seconds
approx. 170°C
Ø 7 mm genuine STEINEL /
Cristal sticks, Prod. No. 006594, 006624 /
Ultrapower sticks, Prod. No. 006730, 006747 /
Color sticks, Prod. No. 006969 /
Glitter sticks, Prod. No. 065539
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be col-
lected separately and recycled in an envi-
ronmentally compatible manner.
- 11 -
MobileGlue 1007-S
179 × 40 x 65 mm
GB