PNI IP440 Manual De Usuario página 8

Adding the camera to the application by
connecting it with a cable to the router
Notes:
• To add the camera to the application via cable, the mobile
phone must be connected via WiFi 2.4GHz to the same
router to which the camera is connected.
• The camera's default username and password are "admin".
1. Connect a network cable to the RJ45 connector on the
camera wire and in the router.
2. In the CamHi Pro application, click on the "+" icon.
3. Select the "IP camera" option.
4. In the following interface, select the "New device" option.
5. Click on "Power is on, next step".
6. Select the "Connected network cable" option.
7. From the displayed camera list, click on the camera you want
to add.
8. In the following interface, press "Add to".
User manual 8