Publicidad
Idiomas disponibles
Idiomas disponibles
! LED Status
LED
1 x 3 sec. Blue
1 x 1 sec. Blue
Blinking red
Red LED on
Red LED off
Red/Blue Blinking
USB Adapter and AT-BT120 Bluetooth Headset
Voice Over Internet Protocol (VoIP) Application
!
Install Software for Bluetooth USB Adapter from the CD-ROM provided in the USB Adapter
package. Note that the CD-ROM is not available in the AT-BT120 package.
!
Plug the USB Adapter USB Bluetooth Dongle (purchased separately) into the USB socket of a PC.
!
Download from the corresponding websites and install Skype, MSN messenger, Netmeeting,
Yahoo messenger, or ICQ application software in the PC.
!
Pairing: Put the AT-BT120 Bluetooth Headset into "pairing" mode. Start the Bluetooth software and
pair the USB Adapter Dongle with the AT-BT120 Headset. The Headset passkey is "0000".
!
Connecting and Disconnecting: please press the S1 key on the Headset to connect the USB
dongle. To disconnect the Bluetooth link, press the S1 key again.
!
Testing the Bluetooth Link: After the USB Adapter Dongle is connected with the AT-BT120
Headset, the PC audio will be automatically routed to the "Bluetooth Audio" driver. Play some
music on the PC by Windows Media Player or other music applications; you should be able to
hear the music on the Headset. If you can't hear it, then go the "control Panel"-> "Sound and
Audio Device Properties"-> "Audio"-> "Sound playback" select the "Bluetooth Audio" to activate
the link.
!
Now you can start using the VoIP application and talk to your friend through your Headset
wirelessly and freely.
!
Connecting AT-BT120 Bluetooth Headset back to your Bluetooth mobile phone. Please follow the
steps from 'Headset in Pairing Mode' to 'Establishing Bluetooth Link'.
Status
Ready can be accessed by paired devices
Talking
Battery low (max. 15 Minutes left)
Under charging
Fully charged
Pairing-Mode
7
In-Tech Electronics Ltd
Unit A, 13/F, Wing Tai Centre, 12 Hing Yip Street,
Kwun Tong, Kowloon, Hong Kong.
8
Publicidad
