Technical Data; Machine Features; Intended Use - Festool ETS EC 150/3 EQ Manual De Instrucciones Original

Measuring uncertainty allow-
ance
CAUTION
Operating noise
Damage to hearing
Use ear protection!

Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level
(3 directions)
The specified emission values (vibration, noise)
4

Technical data

Eccentric sander
Power
Idle speed
Sanding stroke
Sanding pad
Weight (without mains cable, with sanding
pad)
Safety class
5

Machine features

ON/OFF button
[1-1]
[1-2] Speed control
Sanding pad
[1-3]
Plug it-connection
[1-4]
[1-5] Extractor connector
LED for extractor signal
[1-6]
The specified illustrations appear at the beginning
of the Operating Instructions.
K = 3 dB
(vector sum for three
h
a = 4.8 m/s
h
K = 1.5 m/s
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Intended use

The sanders are designed for sanding wood, plas-
tic, composite, paint/varnish, filler and similar ma-
2
terials as directed. With mixed dust containing met-
al (such as dust resulting from paint sanding in the
2
automotive industry) and when sanding damp sur-
faces, special safety instructions must be followed.
The sanders are not intended to be suitable for
grinding bare metal. Material containing asbestos
cannot be processed.
The user is liable for improper or non-in-
tended use.
ETS EC 150/3 EQ
400 W
6000 - 10000 rpm
3.0 mm
D 150 mm
1.2 kg
/II
6 Commissioning
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-

er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be
used.
Connecting and detaching the mains power cable -
see Fig. [2].
Before switching on the power tool, make
sure that the bayonet fitting at the mains ca-
ble is closed fully and locked.
ETS EC 150
ETS EC 150/5 EQ
400 W
6000 - 10000 rpm
5.0 mm
D 150 mm
1.2 kg
/II
WARNING
GB
13