Publicidad
Idiomas disponibles
Idiomas disponibles
Caution:
Use of controls or procedures other than those specified herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since the sensitive circuitry may cause interference to a radio tuner nearby, switch this unit off while operating
other radio devices.
Due to the complexity of the MCU control, please un-plug the main power supply of the unit if the unit stops
during operation! This is not a malfunction of the system!
Precautions for use
Installation
1. Unpack all parts and remove protective material.
2. Do not connect the unit to the mains before checking the main voltage and before all other connections
have been made.
3. Do not cover any vents and make sure that there is a space of several centimeters around the unit for
ventilation.
Connection
1. Insert the DC plug (24.) to the DC jack (22.) of the charger docking station, then connect the AC/DC adaptor
(23.) to AC outlet.
2. Put the main unit on the charger docking station for charging.
3. Turn on the unit by pressing the On/Off button (3.), if the LCD display is on with text, it means the power
supply is normal. Now your system is ready to play the music.
4.
Remarks:
1. To safe the battery life of the built-in rechargeable battery, the unit will turn off after power off if dis-
connected with the charger station. And the remote cannot is not able to power on the unit if the unit is
dis-connected with the charger station. Press the On/Off button (3.) of the main unit to switch on the unit
in this condition.
2. It is recommended to connect the unit to the charger station for home use. So that the unit can stay at
Standby mode after turn off the unit and can use the remote control to
6
Publicidad
