PNI GreenHouse SC1800C PRO Manual De Usuario página 29

Equalization
activated
36
immediately
After pressing the "ENTER" button for 6 seconds, the inverter enters reset
mode. Press "UP" or "DOWN" to select the desired option. Then press
ENTER to exit.
Error codes
01 The fan is blocked when the inverter starts
02 Inverter transformer overtemperature
03 High battery voltage
04 Low battery voltage
05 Short circuit on the output
06 High output voltage
07 Overload Timeout
08 The bus voltage of the inverter is too high
09 Bus slow start error
Enabled
If the equalization function is activated in
program 30, the program can be set. If
Enable is selected in this program, battery
equalization will be activated immediately
and will appear on the screen
is selected, the equalization function will be
canceled until the next time it will be activated
based on the settings in program 35. On the
screen will appear
29
Disabled
. If Disable
.
Reset disabled (default)
Reset enabled
User manual