Publicidad
Idiomas disponibles
Idiomas disponibles
Faults and troubleshooting
− Press the DPI button
(800, 1,200 and 1,600 DPI). The higher you set the DPI of the mouse, the
faster your cursor will move.
− The operation indicator
− If the mouse fails to respond, the battery power level may be low. Replace
the AA battery
− If you are not going to use the mouse for a long period of time, slide the
on/off switch to the OFF position to switch it off.
Faults and troubleshooting
Problem
Possible reason
The product
The batteries
does not
respond.
installed.
The USB receiver
is not installed.
The battery power is
low.
You are using the
mouse on a glass
surface.
The product is too far
away from the USB
receiver.
12
9
to cycle through the mouse sensitivity settings
10
illuminates briefl y when a button is pressed.
16
(see chapter "Installing or replacing the batteries").
15
16
are not properly
Solution
Make sure the batteries have been
/
properly installed in the keyboard and
mouse.
Make sure the USB receiver is properly
14
inserted into the USB port of your
computer. If necessary, try using a
different USB port on your computer.
Make sure the installed batteries
are not discharged. Replace them if
necessary.
Make sure you are not using the
mouse on glass or a reflective surface.
Use a mousepad if necessary.
Make sure the product and USB
receiver are within the transmission
distance (max. 33 ft/10 m).
Publicidad
